The best cure for a spill is a fast response. If a spill is allowed to become a stain, it will be much more difficult to remove. Here are some tips for eliminating stains and spills.
There are three important steps that you must use to treat a stain, hopefully before it has a chance to set in your carpet:
Apply: Wet a clean, white (not printed) paper towel with a cleaning solution. Then dampen the carpet with it. Avoid wetting the carpet through to its backing.
Blot: Absorb the excess liquid from the carpet by pressing straight down with a clean, dry, white paper towel. Do not rub. Place a half-inch thick pad of clean, dry, white paper towels with a weight on top and leave overnight if necessary.
Scrape: Gently scratch the soiled area with the blunt edge of a spoon. Scrape from the outside edge of the spot toward the center.
Asphalt
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Beer
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Berries
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Blood
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Butter
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Candle Wax
Try This Remedy:
Step 1: Scrape off excess wax.
Step 2: Cover with brown paper.
Step 3: Apply warm iron until remaining wax is absorbed. Be sure paper is large enough to cover the stained area. Take care never to touch the iron to the carpet as the fiber might melt.
Step 4: Change paper or rotate to clean area and repeat until all material is absorbed.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Freeze with ice cubes.
Step 3: Shatter with blunt object like the back of a large spoon.
Step 4: Vacuum chips away before they melt.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Candy
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Catsup
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Chalk
Try This Remedy:
Step 1: Vacuum away as much as possible.
Step 2: Loosen remaining material by tapping with a scrub brush or toothbrush. Tap with brush, do not scrub.
Step 3: Vacuum.
Step 4: Apply dry powder cleaner.
Step 5: Tap with brush to work powder into carpet tufts. Do not scrub.
Step 6: Let powder dry 1 hour.
Step 7: Vacuum.
Step 8: Repeat dry powder application if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Chewing Gum
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Freeze with ice cubes.
Step 3: Shatter with blunt object like the back of a large spoon.
Step 4: Vacuum chips away before they melt.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Chocolate
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Coffee
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Cooking Oil
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Dyes - Blue/Black/Green/Red
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Excrement
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners such as.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Foundation Makeup
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Blot-finish with weighted pad of towels
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Fruit Juice
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum
... OR:
Step 1: Blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Furniture Polish
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Grease-Food
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Grease - Auto
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Glue - White
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Glue - Hobby
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
Step 2: Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
Step 3: Repeat above -soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Ice Cream
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Ink - Ball Point Pen
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Ink - India
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Ink - Marking Pen
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Juice Drinks - Artificially colored
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Kool-Aid
Try This Remedy:
Step 1: Blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Lemonade
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Lipstick
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mascara
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mayonnaise
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mercurochrome
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Methiolate
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Milk
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mixed Drinks (Liqueurs)
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mud
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Mustard
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Nail Polish
Try This Remedy:
Step 1: Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
Step 2: Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
Step 3: Repeat above-soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Paint - Latex
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Paint - Oil
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Pet Food
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Papier-Mâché
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Shoe Polish
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Shortening
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Soft Drink
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Tar
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Tea
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Apply water with damp sponge.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Urine - Dry
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Urine - Fresh
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Vomit
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply dry baking soda.
Step 3: Scrape and vacuum.
Step 4: Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Rinse with water as above.
Step 8: Blot-don't rub-dry well.
Step 9: Apply dry powder cleaner (see "Cleaning Solutions").
Step 10: Vacuum.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners such as.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Wine - Red
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Wine - White
Try This Remedy:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply water with damp sponge.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
Unknown
Try This Remedy:
Step 1: Apply a dry cleaning solvent, using a damp towel.
Step 2: Blot-don't rub.
Step 3: Repeat solvent application as above.
Step 4: Blot-don't rub.
Step 5: Apply water with damp towel.
Step 6: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
... OR:
Step 1: Scrape or blot up excess spill.
Step 2: Apply detergent solution (see "Cleaning Solutions"), use damp towel.
Step 3: Blot-don't rub.
Step 4: Apply white vinegar (undiluted), using a damp towel.
Step 5: Blot-don't rub.
Step 6: Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
Step 7: Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning solutions to have on hand:
1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
3. Dry Powder Cleaner: Use powdered carpet cleaners.
4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact your Flooring Canada retailer.
Note: If your carpet has an Ultra 25 a or Everguard Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.
